How to make a hydraulic improved version of hydraulic ram pump which requires no electricity and no motor.This pump consisting of four brass check valve which increase pressure and water output.
This pump uses falling water to lift a lesser amount of water to a higher elevation than the source. So, being primarily used for lifting relatively small amount of water to a higher elevation.
The basic idea behind a ram pump is simple. The pump uses the momentum of a relatively large amount of moving water to pump a relatively small amount of water uphill.
If you want to deliver 2 cubic meter of water to an elevated location, you need at least 6 cubic meters of water to operate the pump 4 cubic meters of which will be used to drive the pump and goes directly as waste.
0 Comments